First Page of Website | Brief Introduction to Company | Product Centre | Dynamic Status of Company | Company Qualification | Business Website | Business Representative | Service Guarantee | Service Guarantee |Sale Achievement & Recruitment | Contact | 中文
· Domestic Series Products
DKJ Series Electrical Actuator
DKJ Common Electrical Actuator
DKJ Intelligent Integration Electrical Actuator
DKJ Module Integration Electrical Actuator
DKJ Intelligent Integration Electrical Actuator
DKJ Module Integration Electrical Actuator
DKZ Series Electrical Actuator
DKJB Series Electrical Actuator
DKZB Series Electrical Actuator
Domestic Series Electrical Operator
Servo Amplifiers Series
Servo Manipulator Series
Spheroidal hinge
Electrical ball valve
Electrical Control Valve
Did not add small classification
Electrical butterfly valve
BAZ Series small electrical actuator
Circuit board and accessories
· Abroad Technology Series
SD series electrical actuator
Angle stroke electrical actuator
Straight stroke electrical actuator
Multi-turning electrical actuator
Straight stroke electrical actuator
Multi-turning electrical actuator
YSD series electrical actuator
Angle stroke electrical actuator
Straight stroke electrical actuator
Multi-turning electrical actuator
Straight stroke electrical actuator
Multi-turning electrical actuator
Introduced Technology Electrical Manipulator
Circuit board and accessories
· Imported with original manufactory
French Bernard series
Rotork Series
EMG Series
Sipos Series
Circuit board and accessories
Product Centre
Current Location：First Page of Website>>Product Centre
Product Name：B+RS250/K(F)40H series electrical actuator
Product Type：B+RS250
torque ：2500 NM
force： N
whole stroke ：28S，40S
power： 220V 380V 415V
control method：
input signal：
output signal：4-20mA
Relative introduction：
B+RS250/K(F)40H series electrical actuator is adopt advanced technology of actuator
I. Product Overview
(A) it is an intelligent control system.
SD series intelligent motor actuator, with the full E took similar products at home and abroad advanced technology premise, according to the characteristics of industrial control systems, the use of modern chip technology to its fully functional by the reliability of PIC-16C711 microcontroller as the core to complete each kind of control, the various functions performed by "software" to complete the procedure.
(B) it is a fully functional control systems.
1, protection ---- off signal when the input signal is less than 2mA, deemed off signal, the output shaft by a user preset state action. Preset three ways: a, in situ, b, full, c, fully closed.
2, over-current protection ---- overcurrent when the actuator control circuit automatically turns off the machine, the actuator remains in place to protect the actuator and valve.
3, Dynamic electric braking function --- When the motor is running to a given value = feedback value due to the inertia of run-down operation causes the output shaft oscillation. In this case, issued by the "Software" program a dynamic electrical braking instruction (ie, given a momentary reverse current) line agencies to make sweeping immediately stop running, no run-down oscillation, which greatly improved the reliability of the automatic control system and stability.
4, the upper limit and lower limit function --- according to the site needs, rotary in the range of 90 degrees, which groups within the rated travel range, upper and lower limit ends freely adjustable, adjustable in the range of about 40%. At the factory, the lower limit is set to 4mA, the upper limit is set to 20mA.
(Iii) it is a high reliability and stability control systems.
The choice of PIC MCU, its powerful, high reliability. It combines central controller RAM, ROM, I / O ports in one. By eliminating the external lead, may be affected by interference is almost zero. Compared with similar products of the conventional circuit willing to have a compact structure, the use of fewer components, small size, easy adjustment, low failure rate, high stability. Another result of the microcontroller is a single-byte instruction, eliminating the confusion opcode and operand, and further improve the stability. Otherwise, the program is burned in the software design and increase the "watchdog" (This watchdog circuit in the MCU is working independently, free from clock circuit influence) in ROM eliminates the MCU fundamentally "crash "occurs, and therefore, this system is a very reliable system. In summary, SD series intelligent electric actuator is an advanced model of the 90s, is a traditional product upgrading products.
Explanation:
Rotary electric actuator for driving 90 degree angle valves butterfly valves, ball valves, 100 valves, dampers, plug valves, flapper valves, etc.
Second, the main technical performance:
The following technical performance mainly refers to the proportion of regulated, controlled and far-switching does not involve following 1,2,3,4,5,6,11,12,13,14 items.
1, the input signal: 4mA-20mA or 1V-5V DC-DC;
2, input channel resistance; 250Ω;
3, the number of input channels: 1 (discrete three);
4, the basic error: ± 1, ± 2.5%;
5, hysteresis: 1%, 1.5%;
6 Dead: 0.5-3% (according to system requirements);
7, the damping characteristics: no swing
8, the power supply voltage: single-phase 220V (+10%, - 15%) 50Hz ± 1%
Three-phase 380V ± 10% 50Hz ± 1%
9, the working environment: Temperature: Outfitted -10- + 55 ℃; discrete -25- + 70 ℃;
Humidity: ≤85%, ambient air does not contain corrosive substances;
10, shell protection grade; comply with GB4208 IP65 (ie, rain and dust);
11, off signal protection: preset three ways: a, in situ, b, full, c, fully closed;
12, overcurrent protection: for different types of models, adjustable protection current value; (mechanical part has over torque protection switch)
13, the dynamic electrical braking function;
14, the upper limit and lower limit function: within the rated travel range, upper and lower limits adjustable in the range of about 40%; (mechanical part of a travel control switches and mechanical limit)
15, working system; reversible intermittent duty, sustained rate of 50% is turned on, connected to 1200 times per hour.
(A) it is an intelligent control system.
SD series intelligent motor actuator, with the full E took similar products at home and abroad advanced technology premise, according to the characteristics of industrial control systems, the use of modern chip technology to its fully functional by the reliability of PIC-16C711 microcontroller as the core to complete each kind of control, the various functions performed by "software" to complete the procedure.
(B) it is a fully functional control systems.
1, protection ---- off signal when the input signal is less than 2mA, deemed off signal, the output shaft by a user preset state action. Preset three ways: a, in situ, b, full, c, fully closed.
2, over-current protection ---- overcurrent when the actuator control circuit automatically turns off the machine, the actuator remains in place to protect the actuator and valve.
3, Dynamic electric braking function --- When the motor is running to a given value = feedback value due to the inertia of run-down operation causes the output shaft oscillation. In this case, issued by the "Software" program a dynamic electrical braking instruction (ie, given a momentary reverse current) line agencies to make sweeping immediately stop running, no run-down oscillation, which greatly improved the reliability of the automatic control system and stability.
4, the upper limit and lower limit function --- according to the site needs, rotary in the range of 90 degrees, which groups within the rated travel range, upper and lower limit ends freely adjustable, adjustable in the range of about 40%. At the factory, the lower limit is set to 4mA, the upper limit is set to 20mA.
(Iii) it is a high reliability and stability control systems.
The choice of PIC MCU, its powerful, high reliability. It combines central controller RAM, ROM, I / O ports in one. By eliminating the external lead, may be affected by interference is almost zero. Compared with similar products of the conventional circuit willing to have a compact structure, the use of fewer components, small size, easy adjustment, low failure rate, high stability. Another result of the microcontroller is a single-byte instruction, eliminating the confusion opcode and operand, and further improve the stability. Otherwise, the program is burned in the software design and increase the "watchdog" (This watchdog circuit in the MCU is working independently, free from clock circuit influence) in ROM eliminates the MCU fundamentally "crash "occurs, and therefore, this system is a very reliable system. In summary, SD series intelligent electric actuator is an advanced model of the 90s, is a traditional product upgrading products.
Explanation:
Rotary electric actuator for driving 90 degree angle valves butterfly valves, ball valves, 100 valves, dampers, plug valves, flapper valves, etc.
Second, the main technical performance:
The following technical performance mainly refers to the proportion of regulated, controlled and far-switching does not involve following 1,2,3,4,5,6,11,12,13,14 items.
1, the input signal: 4mA-20mA or 1V-5V DC-DC;
2, input channel resistance; 250Ω;
3, the number of input channels: 1 (discrete three);
4, the basic error: ± 1, ± 2.5%;
5, hysteresis: 1%, 1.5%;
6 Dead: 0.5-3% (according to system requirements);
7, the damping characteristics: no swing
8, the power supply voltage: single-phase 220V (+10%, - 15%) 50Hz ± 1%
Three-phase 380V ± 10% 50Hz ± 1%
9, the working environment: Temperature: Outfitted -10- + 55 ℃; discrete -25- + 70 ℃;
Humidity: ≤85%, ambient air does not contain corrosive substances;
10, shell protection grade; comply with GB4208 IP65 (ie, rain and dust);
11, off signal protection: preset three ways: a, in situ, b, full, c, fully closed;
12, overcurrent protection: for different types of models, adjustable protection current value; (mechanical part has over torque protection switch)
13, the dynamic electrical braking function;
14, the upper limit and lower limit function: within the rated travel range, upper and lower limits adjustable in the range of about 40%; (mechanical part of a travel control switches and mechanical limit)
15, working system; reversible intermittent duty, sustained rate of 50% is turned on, connected to 1200 times per hour.
- Tianjin Bernard Actuator CO.,Ltd.
- Address：No.1,Haitai Huake 3 Road,Huayuan,Tianjin,China
- Tel:+86-22-27630178 Email:tjbnd@fgbnd.com
- Skype:china.tjbnd;Whatsup:+8613512210719
- Wechat:13512210719 FAX:+86-022-27699915