First Page of Website | Brief Introduction to Company | Product Centre | Dynamic Status of Company | Company Qualification | Business Website | Business Representative | Service Guarantee | Service Guarantee |Sale Achievement & Recruitment | Contact | 中文
· Domestic Series Products
DKJ Series Electrical Actuator
DKJ Common Electrical Actuator
DKJ Intelligent Integration Electrical Actuator
DKJ Module Integration Electrical Actuator
DKJ Intelligent Integration Electrical Actuator
DKJ Module Integration Electrical Actuator
DKZ Series Electrical Actuator
DKJB Series Electrical Actuator
DKZB Series Electrical Actuator
Domestic Series Electrical Operator
Servo Amplifiers Series
Servo Manipulator Series
Spheroidal hinge
Electrical ball valve
Electrical Control Valve
Did not add small classification
Electrical butterfly valve
BAZ Series small electrical actuator
Circuit board and accessories
· Abroad Technology Series
SD series electrical actuator
Angle stroke electrical actuator
Straight stroke electrical actuator
Multi-turning electrical actuator
Straight stroke electrical actuator
Multi-turning electrical actuator
YSD series electrical actuator
Angle stroke electrical actuator
Straight stroke electrical actuator
Multi-turning electrical actuator
Straight stroke electrical actuator
Multi-turning electrical actuator
Introduced Technology Electrical Manipulator
Circuit board and accessories
· Imported with original manufactory
French Bernard series
Rotork Series
EMG Series
Sipos Series
Circuit board and accessories
Product Centre
Current Location：First Page of Website>>Product Centre
Product Name：DKJ-310M type Electrical Actuator
Product Type：DKJ-310M
torque ：250 NM
force： N
whole stroke ：
power： 220V 380V 415V
control method：
input signal：
output signal：
Relative introduction：
DKJ-310M type electrical actuator, output torque is 250Nm, is new type module of actuator. Domestic manufactured actuator
First, use
DKJ-type rotary electric actuator is DDZ electric unit in the instrument cluster execution unit, which accepts adjusting unit (or computer) signal, automatically adjusting the steering actuator to complete the task, widely used in power plants, chemical, petroleum, metallurgy, building materials, heating, light industry, water treatment and other industries. It can output torque and 90-degree angle.
DKJ electric actuator, with a variety of electric operator can adjust the system to complete the "Manual ← → Auto" switch without disturbance, in a timely manner to be adjusted manually distant objects.
I produced the actuator position transmitter are using the latest sensing element, the circuit reference to the latest foreign company, set power transformer, rectifier, regulator, amplifier, constant current one, made of modules (M) so that the actuator reliability and stability, making the system more secure.
Second, the main technical performance
1, the input signal: switch signal
2 input channels: three
3, the input resistance: type Ⅱ 200Ω; Ⅲ type 250Ω
4, the output signal: type Ⅱ 0-10mA, DC; Ⅲ type 4-20mA, DC
4, the output torque: see table
5, the output shaft 100 ± 20 times per revolution Miao
6, the output shaft effective angle 90º
7 Dead: Type Ⅱ ≤150μA; Ⅲ type ≤240μA
8, resistance nits output shaft oscillation frequency does not exceed the "three and a half" cycle
9, the basic error: ± 2.5%
10, hysteresis: 1.5%
11, the power supply voltage: 220V (+ 22V, -33V) 50Hz
12, the use of ambient temperature: Amplifiers: 0 ~ + 50 ℃; actuators: -25 ~ + 55 ℃
13, the use of ambient relative humidity: Amplifiers: 10% to 70%, Actuator: ≤95%
DKJ-type rotary electric actuator is DDZ electric unit in the instrument cluster execution unit, which accepts adjusting unit (or computer) signal, automatically adjusting the steering actuator to complete the task, widely used in power plants, chemical, petroleum, metallurgy, building materials, heating, light industry, water treatment and other industries. It can output torque and 90-degree angle.
DKJ electric actuator, with a variety of electric operator can adjust the system to complete the "Manual ← → Auto" switch without disturbance, in a timely manner to be adjusted manually distant objects.
I produced the actuator position transmitter are using the latest sensing element, the circuit reference to the latest foreign company, set power transformer, rectifier, regulator, amplifier, constant current one, made of modules (M) so that the actuator reliability and stability, making the system more secure.
Second, the main technical performance
1, the input signal: switch signal
2 input channels: three
3, the input resistance: type Ⅱ 200Ω; Ⅲ type 250Ω
4, the output signal: type Ⅱ 0-10mA, DC; Ⅲ type 4-20mA, DC
4, the output torque: see table
5, the output shaft 100 ± 20 times per revolution Miao
6, the output shaft effective angle 90º
7 Dead: Type Ⅱ ≤150μA; Ⅲ type ≤240μA
8, resistance nits output shaft oscillation frequency does not exceed the "three and a half" cycle
9, the basic error: ± 2.5%
10, hysteresis: 1.5%
11, the power supply voltage: 220V (+ 22V, -33V) 50Hz
12, the use of ambient temperature: Amplifiers: 0 ~ + 50 ℃; actuators: -25 ~ + 55 ℃
13, the use of ambient relative humidity: Amplifiers: 10% to 70%, Actuator: ≤95%
- Tianjin Bernard Actuator CO.,Ltd.
- Address：No.1,Haitai Huake 3 Road,Huayuan,Tianjin,China
- Tel:+86-22-27630178 Email:tjbnd@fgbnd.com
- Skype:china.tjbnd;Whatsup:+8613512210719
- Wechat:13512210719 FAX:+86-022-27699915